|
Chevy Crate Engine
|
350 Chevrolet
The Engine Master SB Chevy is built from a new GM Goodwrench long block. By replacing key components (heads, cam, manifold, etc)
we are able to increase horsepower by 150 or more. Each engine is carefully assembled, then run in on our SuperFlow dyno to assure
proper Camshaft break-in and proper ring sealing. After the 30 minute run-in, the engine will be tuned to fine best timing and
carburetor jetting for most torque and horse power. After the Dyno test session the heads are retorked and valves are reset. This
is truly the ultimate ‘Turn Key’ engine – just install it and go have fun.
|
Basic Street Package
• 400 HP ~ 420 ft-lb Torque
• 9.0:1 Compression
• 87 or 89 Octane
• RPM Range: 2,500 - 6,000
• Nice Idle
•Edelbrock Aluminum Heads
•Electronic Ignition
•750 Carb
•Aluminum Water Pump
•HP Fuel Pump
•HD Flex Plate & Balancer
•Price: $5,500
|
Shermanator Package
• Start with Basic Street Package
• 445 HP ~ 440 ft-lb Torque
• 10.25:1 Compression
• 91 Octane
• RPM Range: 3,000 - 6,500
• More Cam - Big Drive in Idle
•Price: $5,995
|
Every engine is Custom Built for its new owner - Special circumstances could change the cams specs etc.
 |
|
Copyright © 2004 Joe Sherman Racing ~ Updated 06/18/05
|
(714) 542-0515
|
|
|
|
